General • vscode pico plugin & debug....
Hi All,I'm trying out the pi pico vscode plugin. I have it compiling my code and am trying to launch a debug session, however gdb-multiarch can't be found.Now the resson for this IIRC, is that on SuSE...
View ArticleTroubleshooting • Re: cant use a 2 TB SD ?
Imager has written a 80 MB "bootfs" and a 5 GB "rootfs"That does not sound correct. IIRC recent versions of RPi OS have about 250Mbyte size FAT partition for boot.Statistics: Posted by drgeoff — Sat...
View ArticleAdvanced users • 24/7 repeat hardware failure
I have a YSF Digital voice gateway running and it originally started life on a pi3 of dubious history, this eventually died to be put on a newer pi3 and it met it's end when wall wart died.Thinking I...
View ArticleTroubleshooting • Re: Pi 5 misses pings on ethernet when using 10HD
Hi,First post too! Thought I'd semi-necro this thread as I've just come across the same issue connected to an actual 10BASE2/AUI/10BASE-T hub.Bit of an edge case I guess in 2024 but glad to see it's...
View ArticleAutomation, sensing and robotics • Re: Automatic Bat detector.
Hi Steve,You do know you can get Kaleidoscope light, from wildlife acoustics, free, both Linux & windows which let's you look at and listen to the recordings, there are several listening options,...
View ArticleClik here to view.
SDK • Re: SPI Slave with DMA
Looks like I forgotspi_set_format(spi_default, 8, SPI_CPOL_1, SPI_CPHA_1, SPI_MSB_FIRST);for continuous mode. It's working now Statistics: Posted by romain145 — Sun Aug 25, 2024 8:15 pm
View ArticleTroubleshooting • Re: Network Manager Pi Access Point not working
Error in logs after creating Ap and attempting to connect to it.Code: 4616266.5907] device (wlan1): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Started Wi-Fi Hotspot...
View ArticleHATs and other add-ons • Relay Induced Noise
Hi,I am working on a little project to control some relays using an RPI. I am using PiRelay V2 (https://thepihut.com/products/pirelay-r ... spberry-pi) for the relays. The load I am handling is 9.2V...
View ArticleCamera board • Re: Hyper-Hemispherical Lens Request
The GS and HQ cameras come with a standard C-mount lens mount, and the HQ can also come with an M12 mount. That gives you the choice of almost any lens you fancy. There's no requirement for the lens...
View ArticleSDK • Re: First attempts to use hardware_powman
Except the Scratch RAM areas are also powered down and isn't that where the stack is by default so I'd have thought that would cause major problems if you haven't moved the stack into SRAM0...
View ArticleRaspberry Pi OS • install custom kernel RPi5, cross compile using RPi5
I am trying to install a custom kernel on 6.6.31+rpt-rpi-2712 distribution.I have compiled the KERNEL_2712 plus changes.I am using an RPi5 with PCIe SSD as the host and plug a new fresh imaged SD as...
View ArticleTroubleshooting • Re: Black screen
Hello. I have a raspberry pi 4 using Dakboard. After a few hours the monitor screen will turn black. The monitor is turned on however it appears it is not getting a signal. If I unplug and plug the pi...
View ArticleHATs and other add-ons • Re: Relay Induced Noise
Is your flyback diode in-line with the solenoid (as you describe), or across the coil (as it should be)?Statistics: Posted by ame — Sun Aug 25, 2024 9:45 pm
View ArticleBeginners • sudo apt update not working
I use Raspberry Pi as my main desktop for everyday web browsing, spreadsheets, etc. Past three years I've used my Pi 4 (8GB) and recently purchased a Pi 5 (8GB). On my Pi 4 I spent a lot of time...
View ArticleAutomation, sensing and robotics • Re: Would SQLite works well with Grafana
I would go with PostgreSQL because I am familiar with it.That is a valid reason. Many thanksStatistics: Posted by David16962 — Sun Aug 25, 2024 10:06 pm
View ArticleBeginners • Re: Upgrading to PI 5.
Maybe install Bookworm on a new/spare microSD card so you can go back if you want.That's what I was thinking of doing. If I get a USB to micro SD adaptor and a 16 GB SD card I can use my Desktop PC to...
View ArticleGeneral • Re: GPIO output defect?
If the OP's pull-down driver has been damaged and no longer works, it seems plausible this was caused by over-voltage burning that pin's driver out, perhaps by connecting it to a 5V signal in...
View ArticleTroubleshooting • Re: Connected two Waveshare HATs to a Pi5, killed my Pi
According to the info in https://www.waveshare.com/wiki/Stepper_Motor_HAT (Q/A-section) stacking is not supportedLadies and gentlemen, we have a winner!OP, how did you get the idea that you could just...
View ArticleTroubleshooting • Screen size problem using 7" Display on Pi 5
I have two screen problem and I suspect they are related.1) The desktop seems marginally oversized in that if I move the mouse cursor to all 4 edges of the screen, on the top and left sides the cursor...
View ArticleTroubleshooting • YoloV5 and Raspberry Camera module (qt.qpa.xcb: could not...
I am trying to setup YoloV5 with live object detection on my Raspbery Pi 4. It has Raspberry Pi camera module connected to it. I confirmed it working with `rpicam-still` which does take a photo.When I...
View Article