Advanced users • What are the default 802.3 ethernet settings in Bookworm?
Device: eth0Connections:eth0: ipv4.method set to manual, with an IP address and gateway address, but no DNS serversWired connection 1: auto-connect with ipv4.method set to auto (which I assume is...
View ArticleGraphics, sound and multimedia • Re: Pi 5 Obsolete TV standards support… how?
I had success using an older version of the operating system.I tried the two earlier versions and I found thatraspios_armhf-2024-03-13/ 2024-03-13 12:12 - does not workraspios_armhf-2023-12-06/...
View ArticleTroubleshooting • Re: PI Zero W heats up soon
After inserting the SD card into my PI Zero W and turning it on, it gets very hot within about 40 seconds.And the PI freezes leaving the following message.Code: Starting Modem Manager...Starting...
View ArticleTroubleshooting • Re: sudo reboot takes 4-8mins
Swap space looks ok. Running Code: swapon givesCode: NAME TYPE SIZE USED PRIO/var/swap file 100M 0B -2Unfortunately I only have one RPi, but I'm happy to abandon the max m10s for now—I'm more...
View ArticleHATs and other add-ons • Re: What is the best drive for raspberry 5?
https://pibenchmarks.com/ has benchmarking stuff and loads of performance infoStatistics: Posted by DirkS — Sat Mar 30, 2024 7:50 pm
View ArticleMicroPython • Re: Transmitting IR from Pico or Pico W
Many IR timings are based on a fixed timebase, so T then T*3 for a "1" pulse, T*3 then T for a "0", and similar so you can usually pack data to be sent as multiple items in a byte, then expand them...
View ArticleGeneral • Re: A bad soldering or too much heat?
Now when you sent an image of unsoldered board, in deed, there are via copper pretty close to pads. In normal soldering situation solder mask would protect.Maybe it is image perspective, but looks...
View ArticleClik here to view.
General discussion • Re: Permanently disable wifi on the raspberry pi 400
Thank you!I will try to remove the wifi chip. I will purchase a heat gun and let you know how it goes.Without experience in doing this sort of thing, you will almost certainly destroy your Pi400. Just...
View ArticleTroubleshooting • Re: Rasp pi 4b don't boot. Green led blinks continuously
Hello, good afternoon.I have a problem with my raspberry pi 4b. I use it with LibreELEC, and suddenly it has stopped emitting the video signal.The red led is on, and the green one flashes continuously...
View ArticleRaspberry Pi OS • Re: 32-bit trixie/testing repo not getting updates?
testing/trixie is not a supported version.Statistics: Posted by kerry_s — Sat Mar 30, 2024 8:30 pm
View ArticlePython • Re: Bookworm & Python library hell
In my case I downgraded to Debian 32 bit version, which solved matching python 3.9 version for appropriate tensorflow lite as well. Anyway if anyone interested.Statistics: Posted by bmadhekar — Sat...
View ArticleSDK • Re: cmake: Mixed host based and RP2040 project...
Somewhat similar I cam across when writing unit tests.I could not make it with one build file having the unit tests run on my local machine and also beable to build the PICO formware.The only way to...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Flex Camera Connection
What do you want to connect? If it's not a MIPI CSI sensor then they only available interface on that connector is an I2C bus an one GPIO.Statistics: Posted by aBUGSworstnightmare — Sun Mar 31, 2024...
View ArticleTroubleshooting • Re: More CUPS issues on Bookworm and CUPS 2.4.2
Hello,Yes this is an RPi 5 so there is a Desktop, I will try that..... and let you know.ThanksStatistics: Posted by ejwjohn — Sun Mar 31, 2024 8:29 pm
View ArticleBeginners • Network connection, two raspberry and WiFi AC
Hello,My goal is to connect two Raspberry together with an Ethernet cable. One of them should act as a Wifi Access point (so I can connect to it with a phone). How should I proceed, to be able to...
View ArticleSDK • Re: pico_w instability with wifi and freertos
...Stack Usage...PICO_USE_STACK_GUARDS and configCHECK_FOR_STACK_OVERFLOW help, but it's pretty easy to vault right past the guard bands. One trick I use is to initialize stack-resident arrays and...
View ArticleTroubleshooting • Re: Rpi5 Power Problems
Not all of my USB sticks work with my Pi 5. Perhaps your drives do not play nice with the Pi 5 too?Ohhh, well is weird because sometimes it works other not. I will try with another one in a moment to...
View ArticleTroubleshooting • Re: Problem with Johnwill Monitor
Installed the 64 bit version.When I try to edit boot/firmware/cmdline.txt, I get told that it is read only and I don't have permission to write it.Damned computer thinks it's in charge...Time to show...
View ArticleSDK • Re: Get Substrings using Delimiter
strtok probably comes closest to meeting the OPs requirement "As efficiently as possible". To avoid reentrancy issues, you can use strtok_r.Statistics: Posted by carlk3 — Sun Mar 31, 2024 8:37 pm
View ArticleClik here to view.
HATs and other add-ons • Re: NVMe useful commands and disabling APST.
I stay on gen2 with APST disabled.On gen3 can do some hang 1 of 10 booting.Wifi scanning at same time hdparm test can be unstable on some case.On gen2 seems totally stable 10/10.The shielded cable...
View Article